top of page

High quality break-before-make rotary switch from Lorlin UK. Available in a choice of Ways and Poles you can select from menu. These are break before make meaning the contact will break before connecting to the next contact in the rotary sequence. Also know as Non-Shorting


Part number LOR = Lorlin Non shorting ---*PL  *P = Number of Pole.  L= Solder Lug 


Number of ways are selectable by adjusting the stop ring located under the panel locking nut. So if you purchase a 1 pole 12w you can adjust to any number of ways below 12 by altering the stop ring.


Contact rating: 250 Vac 150mA


  • Moulded in glass filled nylon UL94V-O
  • Adjustable rotation stop
  • 500V AC dielectric strength
  • 30º indexing angle
  • 38mm long flat shaft
  • Flat cut of shaft direction 90º
  • 6.35mm shaft diameter
  • 9.5mm diameter x 8mm long bushing
  • maximum body diameter 27.5mm
  • Contact material silver plated brass
  • Temperature range -30°C to +85°C
  • Manufactured in UK

Lorlin Rotary switch Break Before Make Solder PCB Select Ways from menu

    bottom of page